Tip : Continuous Label Printing on LabelWriter 450 Twin Turbo
The Dymo LabelWriter 450 Twin Turbo is like having 2x printers in the one machine. It holds 2 rolls of labels and you get to decide if you have 2 rolls of the same label or 2 different sized labels. Some users print on only one label size, and the Twin Turbo offers a number of advantages for these people. First, if you have used up one of the rolls in the printer, you don't necessarily need to stop what you're doing and load another roll - you can simply print to the other roll (and replace the first roll later at a more convenient time). Secondly, if you have a long list of labels to print, you can tell the printer to use both rolls and when one roll runs out, the other will automatically be used by the printer.
Here's an example of how this works......The Dymo LabelWriter 450 Twin Turbo printer can automatically switch from one label roll to the other when you need to print more labels than are left on a roll. For example, suppose you are printing a mailing list that contains 225 addresses and the left roll of Address Labels only contains about 100 labels. You can choose to use both rolls, and when the printer runs out of labels on the left roll, the labels automatically begin printing on the right roll until all the labels are printed. To use this selection, you must have the same type of labels loaded on each side of the printer.
To use both rolls
1. Load the same type of labels on each side of the printer.
2. Select the Use both rolls check box in the Print area.
(When you select the Use both rolls check box, the selected printer image changes to showthat both rolls will be used)
The LabelWriter 450 Twin Turbo page contains a link to the User Guide. Also, within Dymo's DLS software there is a user guide for the software itself, and this is where you will learn about more LabelWriter features. Dymo LabelWriter labels can be found here.
Here's an example of how this works......The Dymo LabelWriter 450 Twin Turbo printer can automatically switch from one label roll to the other when you need to print more labels than are left on a roll. For example, suppose you are printing a mailing list that contains 225 addresses and the left roll of Address Labels only contains about 100 labels. You can choose to use both rolls, and when the printer runs out of labels on the left roll, the labels automatically begin printing on the right roll until all the labels are printed. To use this selection, you must have the same type of labels loaded on each side of the printer.
To use both rolls
1. Load the same type of labels on each side of the printer.
2. Select the Use both rolls check box in the Print area.
(When you select the Use both rolls check box, the selected printer image changes to showthat both rolls will be used)
The LabelWriter 450 Twin Turbo page contains a link to the User Guide. Also, within Dymo's DLS software there is a user guide for the software itself, and this is where you will learn about more LabelWriter features. Dymo LabelWriter labels can be found here.